Directions for Use:

Surface Preparation
Surfaces mus be clean and free of grease, oil dust, paint or any loose materials in order to achieve a good bonding. Before applying PYE AQUA-PLUG, cut open all cracks to be treated to depth of approximately 25mm. Undercut if possible.

Mixing
A clean pail should be used and 2 volumes of PYECEM added to 1 volume of water. Stir to a smooth paste. Add sufficient water to produce a full bodied paint. Stir mixture constantly and use within an hour.

Application:
Wet the area to be treated with clean water before applying PYE AQUA-PLUG within minimum rubbing. Make use mixed PYE AQUA-PLUG is pushed firmly into the hole and cracks and held in place until it reaches initial set.