Visit
Official Website
EN | ÖÐÎÄ | BM


CHUAN HENG HARDWARE PAINTS & BUILDING MATERIAL
12, Jalan Bakawali 52,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+6011-61498686
+607-3552898
+607-3511673

CHUAN HENG HARDWARE
PAINTS & BUILDING

14, Jalan Bakawali 52,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.


Latest News

Y3A 1-3 DOWNY DUCKLING & LOBSTER RED

Jul 31, 2017
Y3A 1-3 DOWNY DUCKLING & LOBSTER RED
View Full Size

Changing old furniture in preparation for Hari Raya Aidilfitri?

Repurposing an old chair works as a beautiful piece of garden art!

Simply paint and hang the chairs on wall,

you can create an unique chair planters to impress your guests! #artsyraya
 

KANSAI WOOD PAINT

Jul 31, 2017
KANSAI WOOD PAINT
View Full Size


You could make a staircase truly unique by adding some pop of colours
of your choice to add in some visual interest with our Colour Story 3; Pause!

KANSAI EMULSION PAINT

Jul 31, 2017
KANSAI EMULSION PAINT
View Full Size

Painting a room with light colours give you more space and room seem much larger!
.Try a pale shade of soft pink, light green or metallic gold to avoid clinical look.
 
 

KANSAI WOOD N METAIL PAINT

Jul 31, 2017
KANSAI WOOD N METAIL PAINT
View Full Size

Don’t forget about your exterior wood and metal work!
Give them a subtle splash of colours and protect it with PAR Supergloss
for mirror-like high gloss finish and excellent weathering.
 
 

[WHOLESALE] LAFARGE QUICKMIX QUICKSKIM 388 25KG - 60BAGS

Jul 24, 2017
[WHOLESALE] LAFARGE QUICKMIX QUICKSKIM 388 25KG - 60BAGS
View Full Size

Description

A polymer modified cementitious topcoat for smooth finishing over interior cement rendered and concrete surfaces.

 

Uses

QuickMix™ QuickSkim™ (388) is a polymer modified cement-based topcoat for smooth finishing over cement-rendered surfaces and concrete surfaces. It is specially formulated to provide better workability and adhesion with the addition of polymer additives. It should not be used on painted surfaces.

 

Advantages

  • Pre-mixed to ensure good consistent quality
  • Pre-packed for convenience in handling
  • Good workability
  • Easy to mix and apply
  • High bonding strength
  • High durability

 

Technical Data

 Appearance  Off-Grey
 Binder  Ordinary Portland Cement
 Filler Material  Graded Calcium Carbonate Powder
 Auxiliaries  Additives to enhance workability, water retention and adhesion
 Water Powder Ratio  0.38 - 0.40
 Wet Density  1600 - 1700 kg/m³
 Dry Density  1200 - 1300 kg/m³
 Bond Strength  Above 0.5 N/mm²
 Recommended Thickness  Maximum 2 mm/layer
 Coverage  Approximately 0.80 m² per kg (1 mm thick)

 

Surface Preparation

  • All surfaces must be clean, free from dust, oil and any trace of foreign materials.
  • For dry or high absorbing substrates, moisten the surface with water prior to application.

 

Mixing

  • Mix one bag (25 kg) of QuickMix™ QuickSkim™ with approximately 9.5 litres of water.
  • Mix thoroughly with an electrical mixer for 3-5 minutes until the desired homogeneous paste is achieved.
  • Ensure the mix is free from lumps before use.
  • Remix for 1 minute if the mixed paste is left unused for more than 30 minutes.

 

Application

  • Apply QuickMix™ QuickSkim™ onto the surface with a steel trowel.
  • If application requires a few layers, the underneath layers must be dry before applying the subsequent layers.

 

Packaging

  • QuickMix™ QuickSkim™ is packed in 25 kg bags.

 

Storage

  • QuickMix™ QuickSkim™ should be stored in dry place free from excessive moisture.
  • It has a shelf life of 6 months in its original packing.

 

Health & Safety

  • QuickMix™ QuickSkim™ is non-hazardous. However, Lafarge Drymix recommends that appropriate safety equipment be worn by workers handling this product, including dust masks, rubber gloves, full eye protection and boots where necessary. In cast of contact with eyes, wash with plenty of water. If irritation persists, seek immediate medical attention. For further information, refer to the Material Safety Data Sheet.

 

For more information, please visit http://www.lafarge.com.my

 

Terms & Conditions

 

PLEASE READ THE FOLLOWING TERMS & CONDITIONS.

 

Delivery Date

Delivery Date must be minimum 3 (Three) working days in lead time and not exceeding 14 (Fourteen) working days from the date of Sale Order. The actual delivery date will be subjected to manufacturer's approval and confirmation.

 

Proof of Delivery

Delivery Order must be accepted and acknowledged by the authorized receipient. Official company stamp, receipient's name and signature must be indicated clearly in the Delivery Order.

 

Site Access

The delivery site must be accessible by transporting vehicle, failure which, manufacturer reserves all rights to cancel the order, and impose penalty charges as indicated .

QCMU 190

Jul 24, 2017
QCMU 190
View Full Size


190MM X 190 MM X 390 MM 

QCMU 190

safety shoes

Jul 24, 2017
safety shoes
View Full Size


size 6 

size 7

size 8

size 9

size 10 

Sika Grout 215

Jun 26, 2017
Sika Grout 215
View Full Size

Building Materials/Cementitious & Waterproofing

SikaGrout 215 Pumpable Shrinkage Compensated Cementitious Grout 25KG

 

Description

SikaGrout 215 is a pumpable dual-shrinkage compensated, self-levelling, prebagged cementitious grout with extended working time to suit local ambient temperatures.

 

Uses

SikaGrout 215 is suitable for repairs to the following concrete structures

  • Machine foundations
  • Columns in precast construction
  • Concrete anchors
  • Bridge bearings
  • Cavities
  • Gaps
  • Recesses
  • Rail beds
  • Honeycombs (pre-packed grouting)

SikaGrout 215 is suitable for grouting works with clearances as low as 5mm.

 

Characteristics And Advantages

  • Easy to mix and apply
  • Good flow characteristics
  • Rapid strength development
  • High ultimate strengths
  • Impact resistant
  • Non-corrosive
  • Non-toxic
  • Iron and chloride free
  • Extended working time
  • Good pumping properties
  • Tested for compatibility with drinking water
  • Dense and non-shrink (2-step expension)

           - Gaseous expansion in plastic stage

           - Crystalline expansion in hardened stage

 

Product Data

 Form
 Appearance / Colour  Grey Powder
 Packaging  25kg bags

 

Storage

Storage Conditions / Shelf Life 6 months from the date of production if stored properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5°C and +40°C. Protect from direct sunlight.

 

Technical Data

 Wet Density  ~2.2 kg/ltr (depending on consistency and temperature)
 Aggregate Size  1.2mm max.
 Layer Thickness  50mm max. per pour / 5mm min. per pour

 

 


You have 0 items in you cart. Would you like to checkout now?
0 items
Recent Updates
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start